Download the PDF guide at the end of this article, in it you could find the following:
1.- SERVICE AND SUPPORT SERVICE
- SOFTWARE SUPPORT
- CONSUMABLE ORDERS
- SAFETY INSTRUCTIONS
Lockout Tagout (LOTO)
Hazard Types
Product Safety Signs
Potential Safety Hazard Areas
Guard Door Interlocks
General Safety Practices
- REMOVING ELECTRICAL POWER
2.- SYSTEM COMPONENTS
- ACCESS DOORS AND PANELS
Top Slide Covers
Oven Door
Canister Bay Door
Power In Disconnect Switch
Signal Tower
Emergency Stop
Touchscreen
Power On
Power Off
- BACK OF SYSTEM
Onboard Computer
UPS
- SYSTEM TOP
Opening the Top Slide Covers
Gantry Assembly
Head Assembly
Head Maintenance Bracket
- MODEL MATERIALS AND TIPS
Materials
Liquefier Tips
Head Swap Procedure
- OVEN
Oven Door
Oven Components
- CANISTER BAY
Accessing the Bays
Canister Bay Components
SmartSpool System
3.- SETUP AND INSTALLATION
- GENERAL INFORMATION
Prepare Your Facility for Installation
Identifying Your System
- BASIC SETUP
Making the Network Connection
Air Supply Connection
Making the Power Cable Connection
- INSTALLING GRABCAD PRINT
Set up the GrabCAD Print server on a network
GrabCAD and GDPR
Connecting to the Fortus Series Printer
- NETWORK SETUP
Configuring the Network
Setting the IP Address
4.- OPERATING THE SYSTEM
- BASIC USER INTERFACE AND OPERATIONS
Using the Touchscreen
Touchscreen Buttons
Materials/Tools Display
Queue Window
Sensor Status
System Status
System Defaults
System Log
Technician Menu
5.- CALIBRATION
- AUTOMATIC CALIBRATION
Start Auto Z Zero Calibration
Z Zero Offset
Start Auto Tip Calibration
Adjust XYZ Calibration Offsets
Adjust XYZ Calibration Offsets for Controller Software version 3.31 and later
Adjust XYZ Calibration Offsets for Nylon CF and Ultem1010
- TIP WIPE ASSEMBLY ADJUSTMENTS
- T16A TIP WIPE ADJUSTMENT
AutoHome XYZ
6.- SYSTEM MAINTENANCE
- UPDATING CONTROLLER SOFTWARE
Web Method (preferred method)
CD Method (alternate method)
- PLACING SYSTEM IN RECEIVE SOFTWARE UPGRADE MODE
- REINSTALLING CONTROLLER SOFTWARE (USING USB FLASH DRIVE)
- MAINTENANCE SCHEDULE
- DAILY MAINTENANCE
Clean the Platen
Empty the Purge Bucket
- WEEKLY MAINTENANCE
Vacuum the Build Envelope
Clean/Inspect Tip Wipe Assembly
- QUARTERLY MAINTENANCE
Clean the Tip Sensor Plunger
- AS NEEDED MAINTENANCE
Cleaning The Liquefier Tips
Cleaning the Cabinet
Cleaning Plastic Components
Cleaning the Oven Door, Camera/Lamp, and Touchscreen Display
7.- TROUBLESHOOTING
- GETTING HELP
- FINDING A REMEDY
Tip Offset Menu
Part Placement Menu
Administrator Menu
System Default Values
Building Screen
Health Monitor
- TOUCHSCREEN NAVIGATION
Building Screen
Materials/Tools
Calibration Menu
Adjust XYZ Calibration Offsets
Tips/Materials Change
Technician
Administrator
System Default
Log Off
Queue Window
Move Commands
Powering On the System
Powering Off the System
- BASIC JOB BUILD TASKS
Before a Job Build
Select a Job to Build
Build Job Warnings
Information Available During a Build
Pausing or Stopping a Job
Remote Job Monitoring
After a Job Build
- REMOVING SUPPORTS
Breakaway Support Material
Soluble Release Support Material
Support Material for PPSF Parts
- MATERIAL, CANISTERS, AND LIQUEFIER TIPS
Unloading Material from the Liquefier Tips
Removing Canisters
Canister Installation
Loading Material to the Liquefier Tips
Canister Auto Changeover
Handling/Storing Canisters
Changing Tips or Material Type
- WORKING WITH THE JOB QUEUES
- SYSTEM STATUS
8.- SUPPLEMENTARY INFO
- DECLARATION OF CONFORMITY
- REGULATORY AND ENVIRONMENTAL INFORMATION
EMC Class A Warning
FCC Statements (U.S.A.)
Canada Electromagnetic compatibility (EMC)
MSDS (Material Safety Data Sheet
Disposal of waste equipment by users in private households in the European Union
- LADDER DIAGRAM
- E-STOP CIRCUIT
- SAFETY INTERLOCK CIRCUIT
Safety Interlock Summary
- F900 ELECTRICAL
- ELECTRICAL PANEL
- AUXILIARY PANEL GEN III
- AUXILIARY PANEL GEN II
- AUXILIARY PANEL GEN I